You should also keep in mind that the importance of a helmet goes way beyond the importance of a good layer of padding. While your jacket is not a complete protection for your head, the kind of a helmet that you use should be a big help. A good helmet can prevent your head from injury and even death in the event of an accident.
A good helmet is much more than a patch that you put on the helmet. You should find a helmet that can be worn to cover your entire head. This way, you can keep your head protected even when you are not wearing your jacket.
Which Helmet Bikers Should Buy
Finally, a good helmet should be comfortable to wear. You should consider the fact that the comfort that you get from a helmet depends a lot on the material that it is made from. So find a helmet that can absorb sweat better than those that are made from cotton, which are known to be a little cumbersome to wear.
Finding a helmet to fit correctly can be a tedious and time consuming task. But the process of fitting a helmet is really not that difficult, if you follow the guide shown below.
- The first thing you should do when fitting a helmet is to take a measurement of your own head shape and size. By taking this simple step, you will be able to order a good fitting helmet and save yourself time and effort.
- Next, decide where you want to put the helmet. You should then measure the distance between the place where you will put the helmet on your head and the place where you want to put the safety strap.
- Now you have taken a measurement, you can now go back to the shopping guide. Remember that your helmet should only go one size larger than your head size, but you should leave room for any additional features or accessories that are available for the helmet. For example, if you are going to add a visor, you will have to remember to buy an extra measurement in that direction.
- Don’t forget to go to the head part. That is where your helmet should sit over your head, and the part that will be most comfortable to wear. If you’re wearing a helmet that is too large, you will feel uncomfortable in that area.
Go back to the shopping guide and use the chart of the S and M-shape. Again, remember to measure your head size and not just your head shape, because a helmet that is too small will not be comfortable to wear and will get lost.
Go back to the shopping guide again and look at the gloves. A helmet that is too small and require gloves that are too big will make it uncomfortable to wear, and it will get lost in the glove compartment.
A good helmet should have an extra part. After all, it can get lost if it doesn’t have a place to rest it. The head part may also be pushed up against the window of your car or home when you are driving or standing up for a long period of time.
Check the straps. If your helmet has a large safety strap, it can get lost if it is the wrong size or is not fastened securely enough.
Go to the guide again and pay attention to the padding. If your helmet is too loose, it can get lost and get damaged by the wind.
Go to the guide one more time and look at the back part of the helmet. Don’t forget to go around the edges to check that there is nothing sticking out that could get caught on something and cause injury.
Check the ear pads. If the ear pads are too loose or too tight, it will cause bad hearing if you are driving or can cause damage to your ears when you are wearing it for any extended period of time. If you are going to wear a helmet with ear protection, make sure you do so.